浸滲設備為什么要浸滲：自從1950年以來，浸滲就作為一種處理氣孔的方法而被廣泛使用，在微孔密封技術領域，相對于5mm鑄件壁厚，我們將直徑在0.254mm以下的孔稱之為微孔。這些孔通常用肉眼是難以發現的。在汽車動力系統及氣動液壓系統鑄件中，微孔的存在將導致被密封介質的浸漏，增加機加工刀具的磨損，同時帶來生產成本的增加，使產品的質量難以得到保證。將在產品的使用過程中，令其喪失應有的功能。

真空壓力浸滲設備是解決上述難題行之有效的方法，攪拌機 乳化機 自動旋轉門 分散機 攪拌機 混合機 乳化機 旋轉門 起重機 攪拌設備 靜態混合器 激光打標 水箱 凈化空調浸滲劑可靠的零件微孔密封能力和有效的解決浸漏鑄件這一工藝方法得到了世界范圍的廣泛信任。并且可抵抗熱、油、化學侵蝕。這種處理過程可以使用在原料、已機加工零件上。不會導致尺寸變化，或是鑄件被污染。

Why do impregnation equipment impregnate: Since 1950, impregnation has been widely used as a method of dealing with pores. In the field of microporous sealing technology, relative to the wall thickness of 5mm castings, we will use diameters below 0.254mm. The pores are called micropores. These holes are usually difficult to detect with the naked eye. In automobile power system and pneumatic hydraulic system castings, the existence of micropores will lead to the leakage of the sealed medium, increase the wear of machining tools, and at the same time increase the production cost, making it difficult to guarantee the quality of the product. During the use of the product, it will lose its proper function.

Vacuum pressure infiltration equipment is an effective method to solve the above problems, mixer emulsifier automatic revolving door disperser mixer mixer emulsifier revolving door crane mixing equipment static mixer laser marking water tank purification air conditioning impregnant reliable parts micropores Sealing capabilities and effective solutions to leak castings are trusted worldwide. And resistant to heat, oil, chemical attack. This process can be used on raw, machined parts. No dimensional changes or contamination of castings.